[[https://www.revelation.com/|Sign up on the Revelation Software website to have access to the most current content, and to be able to ask questions and get answers from the Revelation community]]
==== OI Upgrade - Network Drivers (OpenInsight Specific) ====
=== At 22 FEB 2002 12:24:46PM Leon Shaffer wrote: ===
{{tag>"OpenInsight Specific"}}
Upgraded from OI v3.7.5 to v4.0.1 - everything went fine - no errors.
But after upgrade, if I choose the
Netware NML Multi-user Driver ver 1.5b
I cannot lauch OI - it give an error
Attempt to log in too many users
then
OpenInsight boot up failed
If I select the
All Networks Driver
then I can lauch OI, but it will not use the tables in my volumes due
to the REVPARM file in the volumes!
OI v3.7.5 works fine -
Setup on OI v3.7.5
File Server - Novell v4.11 with SP9 installed (P4,1.5GB RAM)
Workstation(s) - Windows 98 SE (Pentium 4, 256MB RAM)
Network Driver - IPX/Netware Multi-user Driver ver. 1.5a
I can still lauch the OI v3.7.5 with no problem, but the OI v4.0.1
will not boot up!
Things I have tried -
1. Contacted REV Tech Support - they suggested to install then NLM
client side into the OI v4.0.1
2. Backed up the OI v4.0.1 then
Re-install the NLM (client side) into OI v4.0.1 from orginal
diskettes
(this made it even worse - so restored the OI v4.0.1 from backup)
3. Contacted REV Tech Support again - they sent me an LHNLM.DLL file
dated 02/21/02. I installed this file with same results.
4. Searched Online Discussion for upgrade problems - printed the
one from Craig about old LH*.DLL files and deleted those
remaining files in OI v4.0.1 - still no help.
Notice that the IPX/Netware Multi-user Driver ver. 1.5a is not an
option in the OI v4.0.1 NetDrv selection area!
Any suggestions are greatly appreciated.
----
=== At 22 FEB 2002 02:49PM Pat McNerthney wrote: ===
[url=http://www.revelation.com/WEBSITE/DISCUSS.NSF/f12696d31000b22a8525652b00831bb2/f522738929174ee288256b67007ad000?OpenDocument]See this thread.[/url]
Pat
----
=== At 22 FEB 2002 04:04PM leonshaf wrote: ===
Pat,
If you read my "tried so far" section, I had already printed that
thread and removed the files and tried to lauch again with no
success.
Still same problem -
----
=== At 22 FEB 2002 04:59PM Pat McNerthney wrote: ===
Leon,
Oops, sorry about that, right you are.
Are you running OpenInsight on a local drive and then trying to access files on a separate mapped networked drive? If so, I have reproduced this and hopefully will have a fix shortly.
Pat McNerthney
OI32 Grunt Coder
----
=== At 22 FEB 2002 05:18PM leonshaf wrote: ===
Hi Pat,
No, OpenInsight is installed on the Novell File Server, as was
the OI v3.75 - Data Tables reside on same Novell File Server.
Nothing changed with mapping or accessing location with program or
data, just did the upgrade, and did what I indicated in the 1st part
of this thread. - Like I said - OI v3.75 works fine in same location.
----
=== At 22 FEB 2002 07:34PM leonshaf wrote: ===
Update on condition of getting into v4.0.1
If I reboot my workstation, I can boot into OI 1 time. But if I get out of OI, I cannot get boot back into OI - Too many users message. -
I reboot my workstation again, and I can get into OI v4.0.1
1 time again, but if I close it and try to get back into without
rebooting workstation - same message - Too many users.
----
=== At 22 FEB 2002 08:13PM Mike Ruane wrote: ===
Leon-
I was able to duplicate then fix this with the new driver we sent you via email. I tried to call you at your office; you've already left for the day. I'll talk to you first thing Monday morning.
Thanks-
Mike
[[https://www.revelation.com/revweb/oecgi4p.php/O4W_HANDOFF?DESTN=O4W_RUN_FORM&INQID=NONWORKS_READ&SUMMARY=1&KEY=366E8E6828B33DBE88256B68005FA6C5|View this thread on the forum...]]