[[https://www.revelation.com/|Sign up on the Revelation Software website to have access to the most current content, and to be able to ask questions and get answers from the Revelation community]]


==== Printing completes when F5 key pressed? (AREV Specific) ====
=== At 31 OCT 2000 08:34:19PM Barry Stevens wrote: ===
 
{{tag>"AREV Specific"}}
 
<QUOTE>
I have a client that had his computer switched off when Arev was opened.



Now, when he prints, the printing does not complete until he exits arev or presses the F5 key.



Has anyone any clue as to what could be corrupted, viruses etc.



Barry
</QUOTE>
----

=== At 31 OCT 2000 11:24PM dale walker wrote:  ===

<QUOTE>Barry,

When you say that the print job doesn't complete, does that mean that the printer is responding and not all the output is printed? 

Or does that mean that the print job is not queueing up (assuming that  your client is running Windoze9x) or what?



Need to know operating system, Arev version, network printing or local printing.

Try this

If Arev 3.12 then 

F5

RUNMENU STARTUP

Options

Workstation

Hardware

Yield time to Windows - Set to Yes.



Dale

dale_walker@integrity.com

</QUOTE>

----

=== At 01 NOV 2000 05:39PM Barry Stevens wrote:  ===

<QUOTE>Dale



Thanks for that, I will pass it on.



The Arev is 3.12.



Short prints, printing doesnt start



Long prints, starts but not finish.



I was originally getting him to press the  to enter PDISK PRN to see if the printing needed closing.



Barry

</QUOTE>

----

=== At 03 NOV 2000 07:04AM kevin gray wrote:  ===

<QUOTE>You may need to trigger an "end of job".



After sending the print, force a SETPRINTER command and the printer should immediately kick in.



Regards,

Kevin Gray

Graycorp

email kevin@graycorp.com.au

</QUOTE>


[[https://www.revelation.com/revweb/oecgi4p.php/O4W_HANDOFF?DESTN=O4W_RUN_FORM&INQID=NONWORKS_READ&SUMMARY=1&KEY=768DAFAC8BB9EFB08525698A0003249E|View this thread on the  forum...]]