Sign up on the Revelation Software website to have access to the most current content, and to be able to ask questions and get answers from the Revelation community

NLM with Win2000 Client for AREV 2.1 (AREV Specific)

At 15 NOV 2000 02:32:19PM c leenhouts wrote:

We've tried all possible the configuration options, but cannot eliminate a "frame format error" upon starting AREV when we first load LHIPXTR (works fine without it). Has anyone else been able to get this working?

Thanks in advance for any help.

At 15 NOV 2000 04:07PM Don Miller - C3 Inc. wrote:

In the network properties for IPX, have you checked the Frame Type to ensure that its 802.2 and NOT Auto? Are you stacking protocols such that TCP/IP is above IPX/SPX? If so, remove IPX and then re-install it below IPX/SPX. Sometimes protocol stacking causes problems. I assume you're using AREV 2.12. What version of the NLM & Netware (4.x or 5.x)?

Don Miller

C3 Inc.

At 15 NOV 2000 04:11PM Don Miller - C3 Inc. wrote:

BTW. you ARE using Netware, right??? Sorry to ask but …

Don Miller

View this thread on the forum...