2nd terminal on Windows for Workgroups (OpenInsight Specific)
At 27 MAY 1999 02:14:06AM Holly wrote:
We have been running OI 3.6 on a terminal in a WFW network.
The OI system is on the local drive.
We wish to run it from another terminal. The drive letter has been set up to access the OI System on the original terminal.
The start up runs confidently until the message appears:
A device on the system is not functioningAny suggestions on what causes this?
The original terminal was not running OI.
At 27 MAY 1999 08:31AM [email protected] - [url=http://www.sprezzatura.com]Sprezzatura Group[/url] wrote:
Run the NETDRV program and make sure you have the all networks driver loaded.
Also, check that the PIF is set up to use the correct drive and path.
You also might want to check on the workstation that's working and see if any files are being attached using a drive letter that's not available on the other station.
