guides:bfs:mv:managing_openinsight_ide_settings

Managing OpenInsight IDE Settings

- Choose Settings, IDE Settings from the OpenInsight IDE.

mv_089.jpg

mv_090.jpg

Click the test run button mv_091.jpg from the Tool Bar.

Type an initial value (1 – 50) for the Customerid then tab off the field. The form will display the customer information.

You can also enter a new customer record by selecting a Customerid greater than 50.

mv_092.jpg

5. Press the OK button on the form to save this record. The record is saved, the form is cleared. After adding or displaying the last record, choose Cancel to exit the form. This will return you to the Form Designer.

  • guides/bfs/mv/managing_openinsight_ide_settings.txt
  • Last modified: 2023/10/25 10:49
  • by 127.0.0.1