Revmedia open error FS466 (AREV Specific)
At 14 JUL 2000 05:57:38PM Alex Leon wrote:
Any help on the following error:
Linear Hash IPX driver revmedia open error: FS466
Unable to open boot media map.
At 14 JUL 2000 06:03PM Tony Marler @ Prosolve Software wrote:
Alex
Several possibles, but most likely is that the version of the Novell Client you are using. Netware Client 32 3.1 is OK but Service Pack 1 or 2 or Client version 3.2 (from memory) cause problems. Try Client version 3.1 or 2.5 without service packs.
Tony
At 14 JUL 2000 06:15PM Alex Leon wrote:
I'm using several different clients and I am getting a few users that have cleint 2.51. There's only three workstations using the 3.21 client.
At 14 JUL 2000 06:16PM Alex Leon wrote:
I am also getting the same error with Novell client 2.51…HELP
At 14 JUL 2000 06:24PM Tony Marler @ Prosolve Software wrote:
Have you got any clients working?
Sorry I'm not in the office at present so can't look up on our knowledge base, try a search here for FS466 (I know we have seen it before but aside from client version I can't remember the solution. Frametype ?, ensure TSR is loaded,
Tony
At 17 JUL 2000 09:22AM Don Miller - C3 Inc. wrote:
Check the Frame Type on the client desktop. If it is set to Auto, then explicitly set it to the correct type for the version of Netware you are using (typically 802.2 for Netware 4.x).
Don Miller
C3 Inc.
At 17 JUL 2000 10:33AM Alex Leon wrote:
I've tried several things…so far I modified the lhstart.ncf file to reflect the following:
load lh /s:16
load lhipxser /m:20
My frame is 802.2