Loading RevG application on Win2000 workstation (AREV Specific) [Revelation On-Line Wiki]

Sign up on the Revelation Software website to have access to the most current content, and to be able to ask questions and get answers from the Revelation community

At 11 OCT 2000 01:03:33PM Tom Savell wrote:

AREV Specific

I have a customer using a small RevG utility application. He is running this application from an NT server with service pack 6. When he loads the application into a Win98 workstation, it comes up immediately. On the other hand if he loads the application into a Win2000 workstation (with Win2000 service pack 1), it takes over 5 minutes to load. After the app is loaded it works fine.

Any ideas or suggestions?

Tom

At 11 OCT 2000 02:26PM Warren wrote:

I had a similar problem with ARev 2.03 with the NT service on WinNT 4.0 WS.

I tracked it down to being workstation specific (I was able to rule out network connection problems by swapping workstations). I never determined actual cause of the problem - there was no indication that the network card was bad. I had them swap cards and reinstall NT which seemed to solve the problem.

Try running it on a different WS if at all possible.

View this thread on the forum...