third_party_content:community:commentary:forums_nonworks:4ca98b21ca98feed8525663c00504788

Sign up on the Revelation Software website to have access to the most current content, and to be able to ask questions and get answers from the Revelation community

At 09 JUL 1998 10:36:51AM Lori Barron wrote:

We have been experiencing alot of error messages on our system that we have never seen before. We are running Advanced Revelation version 3.12 on a Novell Network. Below is one of the error messages we are getting, this happens on our jobq and happens

intermittantly on various other programs:

Job Q:

Fatal Error Reading FS466

QUICKDEX.MFS

RTP57

MESSAGES

FS466

RTP57

SICCODES

5812 in table MESSAGES

FS466

Linear Hash Client/Server

No Server Response

We do not know what is causing this so any help would be appreciated.

Thanks


At 09 JUL 1998 01:08PM Victor Engel wrote:

We have been getting a lot of these sorts of messages also. The problem has been traced to a bad NIC on the server. The problem was clearly visible as a high error rate in network activity, high retry counts, etc. Since the NIC was replaced, the problems appear to have dwindled, although not enough time has really elapsed to tell for sure. In the near future, we are going to replace the server completely.


At 10 JUL 1998 04:28AM Tony Marler wrote:

Lori

Sounds like a networking problem FS466 ussually signifies this so check connections, network cards etc. Make sure that the LHIPXTSR driver is loading correctly on the workstations.

You can adjust the LH.NLM and LHIPXSER.NLM settings on the server to increase 'keep alive' settings. Same for increasing the retries on LHIPXTSR by adding /R:60 parameter.

More info on settings are in the Knowledge Base artilcle NLM Trouble shooting

http://www.revelation.com/knowledgebase/235e.html

Tony.

View this thread on the forum...

  • third_party_content/community/commentary/forums_nonworks/4ca98b21ca98feed8525663c00504788.txt
  • Last modified: 2023/12/28 07:40
  • by 127.0.0.1