Fatal errors occurring with excess workstations (AREV Specific)
At 27 AUG 1998 03:37:10PM David Plass wrote:
I have a client with an NT network and WFW 3.11 clients. We are
trying to figure out why they would start to get fatal errors when more
than 3 machines log into the applications. The errors they get seem
to indicate configuration settings gone haywire, but we've double-
checked all of the pertinent settings that I can think of, and it would
seem that if it were truly configuration settings (in MA) then the first
3 workstations should get the error.
The error message is usually FS133 and has something to do with not
being able to find a file of some sort, like AREVC.INI. We've checked
the existence of TEMP and it's path, directory permissions, number of
licensed users, and ROLLOUT.SUS's location. We've verified that
no mappings are being altered. One question I do have is this - should
they be using the same PIF off the network or should the PIF be local to
each workstation? The application is in ARev 3.12 and they are
using NPP 1.5.
Thanks in advance.
At 28 AUG 1998 10:10AM Robert Myslik wrote:
Are you using an NML?
Although I have Novell, I have the PIF configured at each workstaion and find no problems that way.
Are you using windows 95? Are those settings correct? Check to make sure the right amount of EMS is allocated - it should be no greater than 4096 and that the Backround in Misc. is NOT checked off.
Are you sure it is not a particular workstation that could have a wiring or hardware problem?
Well I hope this helps you a bit.
Good Luck