Physical errors (AREV Specific) [Revelation On-Line Wiki]

Sign up on the Revelation Software website to have access to the most current content, and to be able to ask questions and get answers from the Revelation community

At 04 NOV 1997 01:34:06PM Dominick Calderazzo wrote:

AREV Specific

My company is having a constant problem with one

of our clients. The keep getting all sorts of

Fatal Errors and Physical Errors reading and

writing. The latest one is as follows:
  Physical Error Reading $ESC.CMP.600
  in Table SOURCE
  Access Denied to the Operating System
  "AMGSFTW/REV73067.LK"  File. 
The program ESC.CMP.600 is not the only program

which gets this errors. There are many more,

this is just an example.

If anyone could possibly give me some insight

into this problem, it would be greatly sppreciated.

thanks

At 04 NOV 1997 01:44PM John Duquette wrote:

Dominick,

It sounds like you have some data corruption in your SOURCE table.

You should use the verifylh utility to check the integrity of this table.

You should also check the drive Volume for errors (Novell's utility is VREPAIR)

If you post your arev version I can tell you the exact syntax to verify the table.

John Revelation

At 06 NOV 1997 01:10PM Dominick Calderazzo wrote:

Thanks John

Our Client is using AREV version 3.12

At 07 NOV 1997 11:55AM Steven Danielson wrote:

You may want to think about how clean their power

supply is, if they have a lot of electric devices

on that circuit kicking on and off they may be

causing power surges which could corrupt data more

often than you think. I have over 150 clients in

automobile garages, most of which don't have a

good wiring job. A good UPS usually helps a

lot.

Steve

View this thread on the forum...