S/LIST - OIPI something strange (OpenInsight Specific)
At 09 NOV 1999 09:45:28AM Don Miller - C3 Inc. wrote:
I have encountered the following situation at one client site:
S/LIST simply won't produce any report when fed a command buffer. It goes through all of the I/O, the print preview window from OIPI initializes and all the pages are incremented but nothing shows. If there are grids or shading, these features are displayed but no data at all.
Even a simple LIST with no other parameters produces the same result.
OI 3.7 - Win95 Revision 4.00.950B, Dell Pentium 350 w/Phoenix bios, Netware 4.11 / Client 32 Version 3.1. The only slightly strange thing is that the network is running in Bindary emulation mode. Microsoft Outlook on the desktop, but nothing else strange. Has anybody else seen this? Are there any known work-arounds?
Don Miller
C3 Inc.
At 09 NOV 1999 10:30AM Don Bakke wrote:
Don,
We just recently had this exact problem and we traced it to the print driver. The client recently purchased an HP 2100 TN and both the driver and the printer have been nothing but problems. They still have the printer but they are using the HP 6P (from the Win98 CD) driver and for the most part everything is printing normal again.
dbakke@srpcs.com
At 09 NOV 1999 12:01PM Don Miller - C3 Inc. wrote:
Don ..
I think you hit the nail on the head. They are using the same printer. Is there a driver for Win-95 or will I have to get it from a Win98 CD (or does HP have an updated driver available?).
Just remember, in the right hands, any tool can become a hammer!
Thanks again,
Don Miller
C3 Inc.