NLM - FS466 - No Server Response if key too large (Networking Products) [Revelation On-Line Wiki]

Sign up on the Revelation Software website to have access to the most current content, and to be able to ask questions and get answers from the Revelation community

At 14 APR 1998 02:11:27PM Bob Fleischman wrote:

Networking Products

NLM 1.5, happened with 1.12, Novell 4.10

I have a client site where we can repeatedly cause a "No server response" error. It seems that if the key to the record is too large the NLM gets confused. We tried changing the /s and the /p switches.

This first arose when we turned on the NLM and some indexes broke. We have a field that has data that occasionally exceeds 1500 characters; this field has a btree index on it. Without the NLM fine, with the NLM no server response on the long record.

I experimented and tried to just create a record with a very long key and that is where I found the error.

We have tried tweaking the /s and /p parameters as suggested in the docs, however if anyone else has any suggestions please let me know here or at:

[email protected]

Thanks

At 15 APR 1998 10:00AM John Duquette wrote:

Bob,

The parameters you might want to change on the nlm are:

set the TSR to be /r:100 /c:120

LHIPXSER.NLM /M:20

Additionally I would not reccomend using the /S setting on the NLM since this can have adverse effects on both the Server and the NLM.

John Revelation

View this thread on the forum...