I am still getting the sporadic error FS461 - Get Local Target Error.

I am using AREV 2.12, LH NLM and Novell Intranetware Client.

I FEEL BAD POSTING THIS AGAIN AND AGAIN, BUT NOTHING

I TRY IS WORKING. Any help is deeply appreciated.

All of my network parameters are as below:

NOVELL INTRANETWARE CLIENT PROPERTIES

Alert Beep - On

AutoReconnect Level - 3

Cache Network Password - On

Cache Writes - Off (changed from On)

Checksum - 1

Close Behind Ticks - 0

DOS Name - Win95

End of Job - Off

Environment Pad - 17

File Cache Level=0

Force 1st Network DRive - Off

Handle Network Errors - On

Hold Files - Off

Large Internet Packet Start Size - 65535

Large Internet Packets - On

Link Support Layer Max Buffer Size - 8192

Lock Delay - 1

Lock Retries - 5

Log File -

Log File Size - 65535

Long Machine Type - IBM_PC

Max Cache Size - 4096

Max Current Directory Length - 64

Message Timeout - 0

Min Timeout to Network - 0

NCP Maximum Timout - 30

Network Status Busy Timeout - 20

Network Status Timeout - 30

Netware Protocol - NDS_BIND

Network Printers - 3

Packet Burst - On

Packet Burst Read Window Size - 24

Packet Burst Write Window Size - 10

Polled Broadcast Message Bugger - 0

Print Header - 64

Print Tail - 16

Read Only Compatibility - Off

Resolve Name Using Primary Connection - On

Search Directory 1st - Off

Search Mode - 1

Set Station Time - On

Short Machine Type - IBM

Signature Level - 1

True Commit - Off

Use Video BIOS - Off

INTEL 82557B-BASED ETHERNET PCI ADAPTER PROPERTIES

Drive Type - Enhanced Mode (32 and 16 Bit) NDIS Drive

Coalesce Buffers: 8

Driver Name: E100B$

Duplex Mode - Auto Duplex Retry

Map Registers - 64

Receive Fram Descriptors - 16

Speed - Auto

Transmit Control Blocks - 16

IPX 32 BIT PROTOCOL PROPERTIES

IPX Retry Count=20

Allow IPX Through Interrupt 7AH - On

Allow IPX Through Interrupt 64H - On

IPX diagnostics Enabled - On

Use all Detectible Frame Types - On

SPX Connections - 5

SPX Verify Timeout - 54

SPX Listen Timeout - 108

SPX Abort Timeout - 540

Allow Connection Watchdogging - On

IPX/SPX COMPATIBLE PROTOCOL PROPERTIES

Force Even Packet Lengths - not present

Frame Type - Ethernet II (changed from AUTO)

Max Connections - not present

Max Sockets - 20 (changed from not present)

Network Address - 0

Source Routing - Off

Do you see anything ??? Thanks in advance, as always !

After searching through the old history of discussion, I changed my command LHIPXTSR /p parameters to LHIPXTSR /p /r:500 /c:720.

Will this do anything to performance? Do I need both parameters? It seems to be working .

Thanks for your help.

Well, It worked for a while anyway….

View this thread on the forum...