Unable to open boot media map (Networking Products)
At 22 DEC 1999 10:12:12PM Andrey wrote:
hi all,
One of my clients submitted the following. Can anyone help?
Has anyone else had this problem:
we installed a new NT machine w/ Novell Client32 ver. 3.1 (w/ service
pack 2) and cannot get AREV 3.11 to run. We have NW 5.0 and NT workstaton am getting the "Linear Hash IPX driver - Revmedia open error FS466, unable to open boot media map"
Any suggestions/fixes/insights are desperately needed.
I'll appreciate for any support.
At 22 DEC 1999 10:17PM andrey wrote:
"Linear Hash IPX driver -
Revmedia open error FS477, unable to open boot media map"
At 23 DEC 1999 04:00AM Tim Marler @ Prosolve Software wrote:
Andrey,
Try taking the service pack off the Client 32.
Tim
At 23 DEC 1999 10:36AM Marina wrote:
Andrey,
Unless you made a mistake typing you have installed a wrong NW client on the NT workstation. Client 32 v 3.1 is for win 98/95 not NT you need to install the right client for NT if you have NT 4.0 install NW 4.5 client. Also, check the frame types on the server and make sure they are the same on the workstation.
Marina
Revelation
At 23 DEC 1999 10:13PM Andrey wrote:
Sorry Marina, I misguided you about client for NT, of course on
NT workstation I have NT Client 4.60.202 with SP 2. I tried to take the service pack off, but no change. Frame type on the server I checked at first time. If you have some other suggestions, I'll glad
to have it.
Thank you for your attention to my problem.
At 27 DEC 1999 11:21AM Stephen S. Revelation wrote:
Andrey,
This is a known problem running in your environment. Check out our Knowledge Base Article on the subject for a workaround.
-Stephen