One User Only allowed on NT network (AREV Specific) [Revelation On-Line Wiki]

Sign up on the Revelation Software website to have access to the most current content, and to be able to ask questions and get answers from the Revelation community

At 19 FEB 2001 10:06:14AM Dave Bennett wrote:

AREV Specific

 Only one user can log into Arev, the second computer receives FS1020 or FS1019, depending on REVPARAM equalling true or false for server only. This is a five user system, and happens does not matter which machine gets in first.
 Server is running Windows 2000 Professional.
 The workstations are all running Windows NT 4.0, one workstation has SP5 and one has SP4.
 The DOS PIF file calls CONFIG.NT which has these calls:
   dos=high, umb
   device=%SystemRoot%\system32\himem.sys
   files=200
Workstations are running TCP/IP protocol only.
Server confirms that lhsrvc is running.

Seems like REVLOCK file opens for one and then can't be accessed by

another. (Event Viewer on server gives this message:

Event Type: Error

Event Source: LinearHash

Event Category: None

Event ID: 30000

Date: 02/16/2001

Time: 1:00:52 PM

User: N/A

Computer: BREDEMUS-7340

Description:

The "LHOpenFile" call failed, returning LH error number 1030, file

number 0, group number 0. Unable to open REVLOCKS file at server.

We have also run FIXVOL on all directories, checked that SYSTEM USER has

full access to all files and directories and replaced permissions on all

files and directories,

At 20 FEB 2001 01:40PM Joe Doscher wrote:

Dave

Take the Revparam files off ( rename or set to 0 ).

Recreate the SYSTEM user and give proper rights.

Get everyone out of the application.

Take NT/Win2000 & NPP off.

IF possible and feasible down the F/S then

Reinstall the NT/Win2000 Service and NPP

Put the Revparam back on ( rename or set back to 1 ).

Verify the service is running on the server

Verify the service is running on the w/s one at a time as they come on

Hope this helps

JoeD

View this thread on the forum...