2nd terminal on Windows for Workgroups (OpenInsight Specific) [Revelation On-Line Wiki]

Sign up on the Revelation Software website to have access to the most current content, and to be able to ask questions and get answers from the Revelation community

At 27 MAY 1999 02:14:06AM Holly wrote:

OpenInsight Specific

We have been running OI 3.6 on a terminal in a WFW network.

The OI system is on the local drive.

We wish to run it from another terminal. The drive letter has been set up to access the OI System on the original terminal.

The start up runs confidently until the message appears:
  A device on the system is not functioning
Any suggestions on what causes this?

The original terminal was not running OI.

At 27 MAY 1999 08:31AM akaplan@sprezzatura.com - [url=http://www.sprezzatura.com]Sprezzatura Group[/url] wrote:

Run the NETDRV program and make sure you have the all networks driver loaded.

Also, check that the PIF is set up to use the correct drive and path.

You also might want to check on the workstation that's working and see if any files are being attached using a drive letter that's not available on the other station.

akaplan@sprezzatura.com

Sprezzatura Group

View this thread on the forum...