AREV 2.10 to Arev 2.12 Maint Upgrade (AREV Specific)
At 20 AUG 2010 07:55:19PM Paul V. wrote:
Perhaps someone can help me. After I performed a Maintenance Upgrade AREV 2.10 to 2.12 I don't have "ALL-NETWORK-DRI 1.1.1.0" In the Drop Down when you run the "BUMP". Here is what I show "WHO":
Optional Modules:
ASCII 2.12
DBASE 2.12
ALL-NETWORK-Dri 1.1.1.0
Upgrade Information
FROM TO
2.0 2.01
2.0 2.1
2.1 2.12
Logon onto AREV Sysprog /x
F5/TCL BUMP
I see 12 drivers and missing "ALL-Netowrk Drv 1.1.1.0
I'm running AREV on a Windows Server 2000
Does anyone know where or how I get my ALL-Network Driver back?
Thank you so much for your help.
At 21 AUG 2010 05:50AM Warren Auyong wrote:
Any of the non-Novell/Netware drivers use byte-range locking as did the "ALL-Network" driver. Use IBM PC Lan, DOS 3.1+, LAN MANAGER NETWORK, etc. instead.
Test by editing the same record in the same file on different workstations. You should get the record locked message.
At 23 AUG 2010 10:45AM Paul Vallario wrote:
Thanks Warren I will run the upgrade to version 2.12 then will run the "Bump". I'm running AREV on a Windows 2000 Server which is part of a domain runing an SBS 2003 server. I only use the Windows 2000 Server for AREV and, I only have 5 users.
I will let you know how I make out.
Thanks again