FS176 - NLM and Netware (AREV Specific)
At 17 SEP 1998 12:37:27PM Kirk Sumpter - University of Missouri, Columbia wrote:
We are running Arev 3.12 on a Novell 3.12 with the Revelation NLM 1.10. One of our users cannot access Arev from her Win95 pc – continually getting the FS176 message.
We have re-installed the Netware Client on her PC with no results. We also switched network cables with another pc that was working properly and could not get in (the other was still working). This PC is coming across a T1 line from another campus (150 miles away) and we only have the PCs on that campus attached to our ARev server when they are actually working.
Does anyone have any ideas to solve the problems with this pc?
At 17 SEP 1998 01:31PM Aaron Kaplan wrote:
Is there anything different about this PC? On a different router or something? Is the Client32 defined the same as the other remotes? Could you have missed something in the settings, frame size or something like that? Is this station connected to a different set of servers? Can you swap machines or cards to see what happens?
At 18 SEP 1998 03:14PM Chris Revelation wrote:
Kirk -
What version of the Netware Client are you using?
Also, check and make sure that all of the IPX/SPX protocols bound to your network card have frame types equal to the frame type of your server and are not set to "auto".
At 23 SEP 1998 06:51PM Eric Allan wrote:
This may be reaching but, we had a situation where our workstations on the other side of our T1 were not having their station IDs broadcasted to the A/Rev application so users were not allowed in. We reset our T1 hardware and the problem was resolved.