Printing (AREV Specific)
At 10 NOV 1999 07:26:03PM Frank S. Adamo wrote:
On a previous reply Rev Tech stated:
]]Also try unchecking the "Print from DOS" on the AREV shortcut
- this setting is counterintuitive - but try it anyway.«
Where is this setting? On what tab, at least?
Also, two of my clients are having problems with timing. Sometimes it seems to take 3 to 5 minutes or more to print from Arev on a netware printer; however, printing from a Windows applications, e.g. Notepad or Word takes only a few seconds.
At 10 NOV 1999 07:54PM Steve Smith wrote:
Frank, on Win 95
My Computer
Printers
Right click your printer used by AREV
Properties menu option
(this is for an HP laser - this may differ for other printers )
Details Tab
Port settings
Spool MS DOS print jobs checkbox
Under Novell your capture command/settings may require a No AutoEndcap setting (CAPTURE.EXE … /NA), or a CAPTURE.EXE … TI=5 (timeout interval=5 seconds) parameter.
In some cases a PDISK PRN or a PERFORM "PC EXIT" immediately after your report will flush it to the queue faster.
For HP printers (that are not ethernet connected to your network) ensure a bidirectional parallel cable is used if required.
Steve