Linear Hash IPX Driver - REVMEDIA Open Error:FS461 Unable to Open bootmedia map (AREV Specific) [Revelation On-Line Wiki]

Sign up on the Revelation Software website to have access to the most current content, and to be able to ask questions and get answers from the Revelation community

At 24 OCT 1997 02:08:09PM Dave Bennett wrote:

AREV Specific

     I have installed the NLM on a 25 users site with all users having no problems but one. Specs as follows
AREV 3.111

NLM 1.10

Novel 3.12

Windows 4.00.950

DELL XPS200s

This is not the only Windows 95 pc. I have tried /p and no /P in DOS and with a Shortcut. I have 482k for largest executable. Without LHIPXTSR I can log into SYSPROG with upper left message of the TSR not being loaded, but with the LHIPXTSR I receive "Linear Hash IPX Driver - REVMEDIA Open Error:FS461 Unable to open boot media map". The MEM/C displays the TSR and I can remove it and loaded it again with no problems.

At 24 OCT 1997 03:48PM John Duquette wrote:

Dave,

Have you changed your frame type from auto to the one being used on your network (i.e. 802.2,802.3…)?

Are you using the Novell Client32? If so what version/release date?

John Revelation

At 27 OCT 1997 09:45AM donny.dane@fema.gov wrote:

HI,

I solved this problem, with the following configuration:

1. make SURE the mappings are correct for program and data!

2. use Novell Client 32

3. in the settings for IPX 32-bit Protocol for Novell Netware Client 32 properties,
     Advanced IPX tab:
           set the primary logical board check mark off
           set the Use only following frame types to (in my case              802.3) whatever you use as the primary frame type on the              server.  Make sure this is the only frame type loaded.
I found this to be the cure on any machine type running win-95.

(p.s. don't worry about binding ethernet_ii if you are using ms-ip, because it won't use this client to communicate)

Donny Dane

Assistant Network Manager

Texas NPSC - FEMA

View this thread on the forum...