Vista pc receives FS1019 error (AREV Specific) [Revelation On-Line Wiki]

Sign up on the Revelation Software website to have access to the most current content, and to be able to ask questions and get answers from the Revelation community

At 29 SEP 2006 12:01:42PM dave w bennett wrote:

AREV Specific

All other workstations are fine.

We are using a 2000 Server with the NT Service 1.5, with the revparam file having serveronly=true

At 30 SEP 2006 05:41PM Steve Smith wrote:

Check the onboard network card is not set to "auto" (either 100 or whatever value is hardware-set (not auto)) and that the NIC address is set and that the DOS environment size is adequate.

At 03 OCT 2006 04:28PM dave w bennett wrote:

Set NIC to 100MBps full duplex.

Set manual IP address

Modified config.nt to files=200 (was 40)

Same result

At 04 OCT 2006 02:37PM Ralph Johler wrote:

Is this a pc running the Vista OS? I thought that Vista OS would not run DOS or have a DOS vm.

Is it possible to run Arev on Vista OS then?

At 16 SEP 2007 09:51PM Dan Reese wrote:

So far I have found that Vista works fine with the All Networks driver, but not with any of the server engines running. I have had to use emsmagic to get ems to work.

View this thread on the forum...