Data Validation (OpenInsight 32-Bit)
At 18 DEC 2003 12:40:03PM Paxton Scott wrote:
This must be simple, but how dow you specify 2 possible literals allowed for a field. Such as "M" or "F"?
Seems like no matter what combination I try, the first one becomes the only allowed entry. Must I code this on lostfocus or poschanged myslf?
[url=http://www.arcscustomsoftware/]ARCS, Inc.
At 18 DEC 2003 01:14PM Mike Ruane wrote:
Paxton-
In the table builder, in the data validation, put 'M' on one line, and 'F' on the next.
Should do it.
At 19 DEC 2003 09:04AM Paxton Scott wrote:
Mike,
Thanks for the reply. Yes, I thought so too, but it seems to only recongize only the "M" on line one. It completely ignores the 'F' on line two.
[url=http://www.arcscustomsoftware/]ARCS, Inc.
At 19 DEC 2003 10:24AM Paxton Scott wrote:
For what it is worth, the validation works if defined on the control (in this case an edit table). Does not seem to pass through from the dictionary [email protected]
[url=http://www.arcscustomsoftware/]ARCS, Inc.