Arev32 and OIPI Printing (AREV32) [Revelation On-Line Wiki]

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

[[https://www.revelation.com/|Sign up on the Revelation Software website to have access to the most current content, and to be able to ask questions and get answers from the Revelation community]]


==== Arev32 and OIPI Printing (AREV32) ====
=== At 25 OCT 2012 02:09:15PM davis young wrote: ===
 
{{tag>"AREV32"}}
 
<QUOTE>
I have recently converted an Arev 3.12 appliation to Arev 32.



In Arev, my reports were set up to run to an HP printer in a condensed font.



When I try to use OIPI in Arev32, the default font that is used in larger and causes reports to not fit as they are laid out. I would like to reduce the default font size in OIPI so I don't have to change it report to get it to fit using OIPI.



In the printer definitions in Arev32, there is a section in the printer definitions to set OIPI Fonts. Is that where I can change the font that is used and if so, how is it entered?



Thanks
</QUOTE>

[[https://www.revelation.com/revweb/oecgi4p.php/O4W_HANDOFF?DESTN=O4W_RUN_FORM&INQID=NONWORKS_READ&SUMMARY=1&KEY=C6A46D9B4E0087F7FB3B913E4|View this thread on the  forum...]]