Sign up on the Revelation Software website to have access to the most current content, and to be able to ask questions and get answers from the Revelation community

REVG not working on NT Server (AREV Specific)

At 19 AUG 1999 09:37:53AM Karen Layton wrote:

I have a very old REVG app that we had to move to our new NT server… and now it doesn't work. When we try to log in we get the error "ATTEMPT TO LOG IN TOO MANY USERS" even though no one is logged in.

Any one know how to make REVG work on an NT server?

Thanks,

Karen Layton

At 19 AUG 1999 09:53AM Steve Smith wrote:

Your application should work fine on NT. You need to use the generic DOS 3.1 drivers. From DOS (uppercase)

REV SYSPROG

then from TCL:

UPDATE.DRIVERS {Enter}

Select 5. GENERIC DOS 3.1 NETWORK

You probably have the Novell driver still loaded. That should keep you out of trouble for hours …..You may need to convert as above on the Novell network before moving to NT.

Don't have REV.EXE marked read-only.

Steve

steve@state-of-the-art.com.au

At 19 AUG 1999 03:56PM Karen Layton wrote:

At 19 AUG 1999 03:56PM Karen Layton wrote:

Thanks Steve, that worked great!

Karen

View this thread on the forum...