Sign up on the Revelation Software website to have access to the most current content, and to be able to ask questions and get answers from the Revelation community

Error Running Arev on Win98 (AREV Specific)

At 11 OCT 1999 02:22:00PM Brad Hudson wrote:

I receive an error runnning Arev 3.12 on a win98 PC. Arev is hosted on a NetWare 4.11 server and the PC is running Client 32 Version 3.1,

the The error is as follows: "This device does not exist on the network. Reading device LP1?" The PC has no local printers attached to it, only network printers.

At 11 OCT 1999 04:16PM Matt Sorrell wrote:

Brad,

Have you made sure that you are capturing the LPT port in the printer definition?

Matt Sorrell

msorrel@greyhound.com

At 12 OCT 1999 09:26AM Don Miller - C3 Inc. wrote:

Since Windows supports deviceless printing (directly to a queue) you need to do one of two things: 

Set up the network printer so that it captures LPT1 in the Printer Properties dialog box.
or

Start AREV from a batch file which captures the printer: 

AREV.BAT
CAPTURE L1 QUEUENAME /NB /NT /NFF /TI=30
AREV  /M4096X
ENDCAP

and point your shortcut to AREV.BAT.

Don Miller

C3 Inc.

At 12 OCT 1999 04:53PM Claude Mansutti wrote:

I know on Novell 5 there is a red "N" in the system tray, if there is one in Novell 4.x (Providing you have client 32 loaded), Right click it and you can directly capture all LPT ports and re-direct then to network queues.

Claude

View this thread on the forum...